|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 12 gauge shotgun patch jag is designed specifically for cleaning 12 gauge shotgun barrles. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads.
|
Our 410 gauge shotgun patch jag is designed specifically for cleaning 410 gauge shotgun barrles. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads.
|
Our 20 gauge shotgun patch jag is designed specifically for cleaning 20 gauge shotgun barrles. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 28 gauge shotgun patch jag is designed specifically for cleaning 28 gauge shotgun barrels. These patch jags press the patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. For faster cleaning of shotgun barrels, you can use 0000 mild steel wool or fine brass wool spread over the patch instead of a brush to loosen dirt. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our shotgun jags fit all standard rods with 5/16x27 threads.
|
Our 30 caliber rifle patch jag is designed specifically for cleaning 30 caliber barrels, including but not limited to30 Carbine, 308, 30-06, 300, 303, 32 Win, 32 ACP, 32 H&R, .327, 32 Rim . These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
|
Our 338 caliber patch jag is designed specifically for cleaning .338 caliber barrels. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 9mm-.358 caliber patch jag is designed specifically for cleaning .358 caliber barrels, including but not limited to 9mm, 38 spl, 357 mag,38 Super, 35 Rem, 35 Whelen, 356 Win. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
|
Our 40 Caliber.10mm patch jag is designed specifically for cleaning .40 caliber barrels, including but not limited to 40S&W, 10mm, 41 mag, 400 Corbon 41 Action Express. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
|
Our 44 Caliber patch jag is designed specifically for cleaning .44 caliber barrels, including but not limited to 44 Magnum, 44 Special, 444 Marlin. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-.45 caliber rfiles and pistols. Square patches should not be used with our jags.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our 45 Caliber patch jag is designed specifically for cleaning .45 caliber barrels, including but not limited to .45 ACP, .45 GAP, .460 SW, .45 Win Mag, .454 Casull. These patch jags press a patch that has been treated with solvent or bore paste against the barrel and into the rifling to mechanically strip the carbon, plastic, and copper out of the bore. We used this patch with no solvent for demonstration purposes, and pushed it through the barrel once. As you can see, these Jags clean better than any other jag on the market. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the bore for storage as well as removing oil before firing. Our rifle jags fit all rods with standard 8x32 threads.
In addition to this product, we suggest you purchase USP Bore Paste and round TCS patches for .30-.45 caliber rfiles and pistols. Square patches should not be used with our jags.
|
This 180 count bag contains round patches made of 100% cotton flannel that are perfectly sized to correspond to the following TCS Cleaning Jags: 22 Caliber, 243 Caliber(6mm), 25 Caliber (6.5), 270 Caliber (6.8), and .284 caliber (7mm). These patches will provide the best fit and function in a wide variety of firearms when used with our jags.
In some special cases involving certain short barrel 22 caliber pistols with tighter than average bores, these patches may be to thick. We have experienced this with Bersa, Firestorm, and Walther pistols. If you have one of these pistols or a short barrel .22 pistol similar to them, and you experience unusual tightness, do not force the jag and patch into the bore. We have thinner patches available.
|
This 160 count bag contains round patches made of 100% cotton flannel that are perfectly sized to correspond to the following TCS Cleaning Jags: 30 caliber, 338 caliber, 9mm (358 caliber), 40 caliber (10mm), 44 Caliber, 45 Caliber. These patches will provide the best fit and function in a wide variety of firearms when used with our jags.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 130 count bag contains round patches made of 100% cotton flannel that are perfectly sized to correspond to the following TCS Cleaning Jags: 50 Caliber Muzzleloader, 28 Gauge, 20 Gauge, 12 Gauge. These patches will provide the best fit and function in a wide variety of firearms when used with our jags.
|
TCS aluminum pistol cleaning rods come in three sizes: Law enforcement, Universal Pistol and Heavy 9MM or Larger. The photo shows a comparison of all three lengths in order from top to bottom. This 8" 9mm or Larger Pistol Rod is the perfect length for cleaning the longer barrel target pistol and revolvers commonly owned by the public. With a 30 caliber rod, it has the extra strength needed for larger calibers and can be used with any handgun above .38/9mm. Made with a solid aluminum shaft that turns to follow the rifling, and an ergonomic handle, this tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes.
For best results, we recommend you use it with TCS Jags and USP Bore Paste. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time.
|
TCS aluminum pistol cleaning rods come in three sizes: Law enforcement, Universal Pistol and Heavy 9MM or Larger. The photo shows a comparison of all three lengths in order from top to bottom. This 6" Law Enforcement rod is the perfect length for cleaning the 4.5-5 inch duty guns police officers are issued. It is small enough to fit easily into any bag or compartment an officer wishes to carry cleaning supplies in. Made with a solid aluminum shaft that turns to follow the rifling, and an ergonomic handle, this tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes.
For best results, we recomend you use it with TCS Jags and USP Bore Paste. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<p>
G96 triple acting gun treatment cleans, lubes, and protects. We frequently use this product to protect firearms when they are in short term storage. It is also an excellent general purpose lubricant, that resists freezing as low as 50 degrees below zero. This twelve ounce can comes with a spray applicator that makes it easy to reach into tight spaces.
</p>
|
TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods come in two sizes: 28" which is perfect for M4 Carbines and 36" which is perfect for longer bolt action rifles. This 28" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes.
For best results, we recomend you use it with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
|
TCS 22 Caliber & Larger, Stainless Steel Rifle Cleaning rods come in two sizes: 28" which is perfect for M4 Carbines and 36" which is perfect for longer bolt action rifles. This 36" Stainless Steel Rifle Rod has a solid shaft that turns to follow the rifling, and an ergonomic handle. This tool is both rugged and easy to use. It uses industry standard 8/32 threads and will work will all standard cleaning tips, loops, and brushes.
For best results, we recommend you use it with TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This product is the perfect length to clean shotgun choke tube threads. It has a non rotating shaft makes it easy to clean the threads in the barrel. It has standard 5/16x27 threads and can be used with a wide variety of industry standard brushes and swabs.
Thank you for choosing TCS.
|
This product is the perfect length to clean shotgun barrels of any length. It has a non rotating shaft that is perfect for smooth bore barrels. The user should rotate the shaft when cleaning rifled barrels. It has standard 5/16x27 threads and can be used with a wide variety of industry standard brushes and swabs.
For best results, we recomend you use it with the TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
|
This product is the perfect length to clean most muzzle loader barrels. With its heavy duty solid aluminum shaft, this rod makes an excellent range rod It has standard10x32 threads and can be used with a wide variety of industry standard brushes and swabs.
For best results, we reccomend you use this rod with the TCS Jags and USP Bore Paste listed below. With these products, you will dramatically decrease cleaning time, freeing you to do other things with your valuable time. Thank you for choosing TCS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Laboriously designed and tested, TCS Ultimate Firearms Lubricant is a fully synthetic oil specially formulated to penetrate and bond with the metal in your firearm. Because this oil is fully synthetic, it evaporates more slowly, and protects longer than traditional oils, it also contains none of the lacquers that caused older mineral oils to thicken and harden with age. This is important if you want to signifcantly reduce wear and tear and improve the function of your gun. Compare this oil to any other oil and you will find it is simply the best.
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 12 O-rings for our 22 Caliber Patch Jag.
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 12 O-rings for our 243 Caliber Patch Jag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 12 O-rings for our 257 Caliber Patch Jag.
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 12 O-rings for our 270 Caliber Patch Jag.
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 12 O-rings for our .284 Caliber Patch Jag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 10 O-rings for our 30 Caliber Patch Jag.
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 10 O-rings for our 338 Caliber Patch Jag.
|
Many of our satisfied customers have asked us to sell extra O-rings in case they damage one. We have listened and now carry this handy package of 10 O-rings for our 9mm Patch Jag.
|
|
|
